CYBUILD ENGINEERING SOLUTIONS
PROJECT DESK — DISCUSSION PREPARATION

Separate a connected route from a feasible route.
Public guide edition 2026-10-22
https://www.cybuild.net/project-desk/routing-conditions/

NEXT DECISION
What evidence is still needed to turn the proposed route into a coordinated design basis?

BEFORE THE FIRST REVIEW
Establish what belongs in the active layout.
• Which equipment remains active, which is new, and which is being demolished?
• Is the reference a controlled drawing, a survey, a layout image, or a diagram? What can its geometry actually establish?
• Where is the proposed receiving connection, and which location and elevation information is available?

Bring to the conversation: Bring a current architectural background and the available mechanical layout. State the source and limits of each reference.

Keep the limit clear: An image placed over a drawing is not automatically field control or a verified equipment location.

AS INFORMATION DEVELOPS
Review continuity and physical feasibility as separate questions.
• Can the proposed branches and collector be followed continuously, including their receiving connection?
• Which outlet elevations, usable gravity fall, obstructions, and maintenance clearances still need confirmation?
• Who will confirm equipment-specific trap, pressure, and secondary-protection requirements?

Bring to the conversation: Show the proposed network and its unresolved interfaces on a reviewable drawing. Keep the architectural reference intact and identify assumptions.

Keep the limit clear: A connected drawing can pass a continuity check while elevation, hydraulic, equipment, or field constraints remain unresolved.

BEFORE THE NEXT ISSUE
Reconcile the route against the information received.
• Have equipment positions and outlets been reconciled with the current mechanical information?
• Are the receiving connection, service provisions, and required clearances represented consistently?
• Which feasibility questions were actually answered, and which must remain identified as holds?

Bring to the conversation: Issue a drawing that communicates its purpose, verification state, and outstanding interfaces. Distinguish a progress overlay from a completed design.

Keep the limit clear: Drawing integrity and editable geometry do not establish field verification, permit acceptance, or installation.

General preparation guidance. Confirm project-specific requirements and responsibilities with the appropriate project team. This brief contains public prompts only; it does not create a portal record or establish approval.